Applications – Martinloren

3D Printed Attenuators

DIY oscilloscope attenuators using 3D printed method.

Components tester with X-Y mode to generate Lissajou patterns.

Quick diagnose reversing/parking sensors with this DIY Probe.

Budget PSI SENSOR MOD to allow for more below 0 PSI range

A new 4:1 attenuator with 4x nominal.

Read directly the AC Current on your Oscilloscope with this simple sensor.

A DIY attenuator for +/-5v input oscilloscopes to perform primary ignition work.

Secondary Ignition Waveforms, no wires, directly to the phone.

Build your own DIY dongle to perform the Relative Compression Test on-the-fly.

Build a compact Dongle to test the CAN Bus.

An accelerometer based, oscilloscope powered dynamic balancing machine.

Listening to automotive modules with a stethoscope. A new beginning for automotive diagnostic.