2.3.1 (201) Dec, 2020

Implemented enhancements

• Shadow behind horizontal cursors differential value (when have 2 cursors)
• Set maximum Automotive Module recording length according Android device memory.

Fixed bugs

• Fixed bug on statistics for Channel 1
• Fixed bug on user statistics option
• Fixed wrong signal visualization when channel 2 is not 1:1 ratio with channel 1.
• Fixed alarm for horizontal cursor.
• Fixed bug on voltage selector for HS402 PRO
• Fixed crash on tap 3 fingers on the screen

2.3.0 (197) Oct, 2020

Implemented enhancements

• Added handle also for Channel 1
• New Instrustar ISDS210 Driver
• New PWM Module for HS402, Hantek 6022, Loto 482, Instrustar ISDS205
• DSP Filters works also in Automotive Module
• Automotive labels tool repeat the first label again at the end of the sequence, improved visibility
• Settings shows Bluetooth paired and discovered devices
• Calibration panel shows the actual voltage ranges for the oscilloscope
• It is possible to save/load calibration data on/from file.
• Disabled Automotive Tools in FFT graph (not usable)
• Redesigned cut function in vertical cursors (automotive module)
• Horizontal cursor can be moved also on second scale
• Channel-2 signal can be scaled independently from channel-1
• Added Alarm Cursor (for horizontal cursors, available in 2020 Update)
• Supported new Loto OSCA02 and Loto OSC802 (input range up to 10Vp).

Fixed bugs

• Fixed crash in License page and FFT peak-hold
• Fixed bug on FFT peak-hold switch
• Fixed bug on HS101 AC/DC selector for some phone
• Fixed bug on HS10X / HS402 for AC/DC selector if related hardware was not implemented
• Fixed bug on system crash
• Fixed wrong measure on 2V range for HS402
• Fixed bug on HS101-BLT not recognized in some model of phones with Android 10
• HS402 input button settings didn’t work (requires HS402 firmware 1.5)
• Corrected error on vertical cursor when channel-2 scale is different from channel-1
• Vertical cursors can now be moved when in proximity of channel-2 cursor

2.2.9 (182) Jul, 2020

Implemented enhancements

• Added link to the change log in the Info Page
• Horizontal Cursors works also on the Second Scale
• Automotive Module supports Second Scale on the right
• Duty cycle, RMS values more stable
• Added histogram in the statistics (only from update 2020)
• Added FFT – Max Peak mode

Fixed bugs

• HS402 driver improved stability
• Fixed wrong menu size in Automotive module at startup without any oscilloscope connected.
• Fixed wrong channel 2 color in Settings
• Fixed Second Scale visualization issue in some case
• Probe selector could not show all probes in some case (next release)
• Corrected FFT bug did not show in particular conditions
• Fixed channel number in filter (wrong name only)
• Fixed crash on load automotive files inside oscilloscope screen
• Fixed FFT peak-hold function
• Fixed FFT did not show on loaded files

2.2.8 (179) Jun, 2020

Implemented enhancements

• Improved user interface (added shadows, right panels color according channel colors)
• Second scale on the right in Oscilloscope screen
• Added channels units information in Data Logger exported CSV
• Added freq() function in Math Module (BETA)

Fixed bugs

• HS402 driver works for Android SDK < 9
• HS102 channel 2 AC/DC selector didn’t get right settings on startup
• Fixed wrong channel names on UI channels panels

2.2.7 (177) Jun, 2020

Implemented enhancements

• New WAV format exporter
• Changed overscale visualization method
• Math channel color is configurable
• Added fullscreen mode for Data Logger
• Data Logger can load saved or modified CSV files

Fixed bugs

• Corrected bug on statistics on HS402 (when use only CH-2)
• Corrected max range data in oscilloscope mode
• Corrected wave color for Math channel
• Corrected waves color when load a file in oscilloscope mode

2.2.7 (176) May, 2020

Implemented enhancements

• 720° Overlay allow movable cursor to measure over the area
• Folder structure is created as user authorize permissions
• Automotive Label Tool allow up to 12 cylinders
• Voltage change now disable the AUTO voltage mode
• Scroll can go over signal end
• New Duty Cycle calculation algorithm
• New DSP Filters
• New HS402 DIY Oscilloscope Driver
• Added new probe units: kPa, mb
• Added probes offset auto calibration option
• UI updated in some part
• Automotive module menu can be hidden
• Trigger is more easy to be moved on high-resolution screens
• New Digital Module available for tests
• Updated calibration module, calibration multiplier reset just interested voltage ranges)
• Avoided memory leak in Cypress FX2 Experimental mode
• New Cylinder Sincronization Overlay (Automotive Module)
• Added color settings and thickness for waves
• Updated drivers: HS10X, Loto OSCA02 (support for FX2 Experimental Mode)
• Automotive module support recording cut
• Added WAV format exporter (next release)

Fixed bugs

• Fixed samples error on OSCA02/OSC2002
• Fixed crash on Data Logger – Channel 2
• Fixed UI error on Data Logger
• Fixed Hantek 1008 data retrieving in Normal Trigger Mode (not it read the full buffer)
• Fixed Probes update on change
• Fixed bug on Settings -> Samples Interpolation
• Fixed calibration issue for Loto OSC (all) in some case
• Fixed Overscale issue on Probes with negative multiplier
• Fixed new Probes issue (could not use after creation)
• Fixed crash on Loto OSC on first run
• Corrected calibration issue on multiplier
• Calibration forms are now visible on medium resolution devices (small screens)
• Fixed default device OSC482 among DDS120 and OSC482

2.2.6 (166) Mar, 2020

Implemented enhancements

• Oscilloscope allow data import/export
• Created new folders to keep saved files: Screenshots folder and Scope folder
• Automotive Module support auto scroll according finger swipe (just after recording finished for data analyse)
• FFT is now among the Modules
• Trigger design updated
• Hantek iDSO1070 can configure IP address in the settings
• New Horizontal Cursors & Labels Overlay
• Improved Vertical Cursors
• Improved Logger
• Added Driver for Loto OSCA02 and Loto OSC2002 (2019 Edition)
• Improved Info panel (added Device name)
• Labels can be exported/imported
• Improved main view / added buttons with menu
• Double click activate screen auto resize

Fixed bugs

• Fixed crash or freeze on Automotive Module data import
• Fixed Normal and Single Trigger issue on HS10X for rate <=100KSa/s (not roll mode)
• Fixed issue on the original Brightness restore
• Fixed visualization for waveform generated by Math Module
• Fixed first sample error on OSC802 and OSCA02

2.2.5 (157) Feb, 2020

Implemented enhancements

• Hantek 1008 added rate: 9KS/s
• Duty Cycle calculator allow up to 5% tollerance on the requirement to have minumum value = 0V
• Better file manager for Automotive Module
• File Manager export also in CSV and XML formats
• Automotive Module allow to import and analyze waveforms without requiring the license
• Better auto-scrolling during Automotive Module recording
• Better design for menu in Voltmeter / Datalogger panel
• Channel 2 indicator moved on the left in Automotive Module
• Better colors for waveforms in Automotive Module
• File preview in Automotive module now uses 16:9 format
• Old DDS120 must be configured first time in the Settings. See here
• Supported new SainSmart DS482. See here

Fixed bugs

• Hantek 1008 Fixed single trigger for lower rates (18 and 38 KSa/s)
• Statistics corrected in Single Trigger Mode.
• Fixed issue while operate 1-2-3 Label Tool in Automotive Module
• Fixed fields size in Settings -> Probe panel
• Automotive Module show correclty data units after import.
• Automotive Module before set the Coupling to DC, now it keep AC or DC according to oscilloscope previous settings.

2.2.4 (154) Jan, 2020

Implemented enhancements

• New Loto OSC802 Driver
• Added optional scroller for Oscilloscope and FFT screens
• More stable FFT statistics
• Added auto-resize button for FFT
• Improved Bluetooth connections management. Now you can pair several HS101 BLT oscilloscopes, then HScope connect just to the active one.
• Automotive Data can be exported from low memory devices (before it crashed)
• Improved Automotive scroller
• Automotive Module export data in a new optimized and fast format (.hxml)
• Automotive module can load and show saved waveforms (can load old and new format files)
• Automotive new file format support waveform preview

Fixed bugs

• Automotive Module produced corrupter samples on start (on first chunk)
• Automotive Module fixed incorrect view size in some cases
• Automotive Module could not enable channel after disable for 1 Channel Oscilloscopes (ie. HS101)
• Fixed bug on iDSO1070, just 1 IP allowed for router mode (check device guide)
• Fixed Time/Div selector in Oscilloscope